Wiki source code of MySQL Installation
Version 78.1 by Thomas Mortagne on 2022/11/18
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | {{box cssClass="floatinginfobox" title="**Contents**"}} | ||
| 2 | {{toc/}} | ||
| 3 | {{/box}} | ||
| 4 | |||
| 5 | = Compatibility Considerations = | ||
| 6 | |||
| 7 | See [[Database support strategy>>dev:Community.DatabaseSupportStrategy]] for the supported versions. | ||
| 8 | |||
| 9 | == MyISAM storage engine == | ||
| 10 | |||
| 11 | MyISAM (the default storage engine for MySQL until release 5.5.5 in 2010) does not support transactions. If there is an error while data is being saved to the database, XWiki will attempt to roll back the transaction to its previous known good state. If you use MyISAM, it will do nothing, leaving the database in whatever state it was in when the error occurred. | ||
| 12 | |||
| 13 | {{warning}} | ||
| 14 | If you use MySQL with any engine that does not support transactions, you will most likely corrupt your database.** We highly recommend using a storage engine such as InnoDB which supports transactions.** | ||
| 15 | {{/warning}} | ||
| 16 | |||
| 17 | == MySQL versions older than 5.0 == | ||
| 18 | |||
| 19 | XWiki does not fully work with MySQL versions 4.x or lower, due to several limitations of the way the SQL standards are implemented in MySQL, limited support for non-latin1 encodings, the flaky integration of Hibernate and MySQL 4, and other things. Most parts of the application work fine, but there are some parts that cannot be easily fixed, so if you must use MySQL 4.x, you're doing it on your own. MySQL 4 is pretty old and buggy, so we recommend upgrading. | ||
| 20 | |||
| 21 | == MySQL versions older than 5.7 and utf8mb4 == | ||
| 22 | |||
| 23 | If you use utf8mb4 encoding, you won't be able to use a version of MySQL older than 5.7 out of the box because of a limitation in the default maximum size of the keys and the default row format. | ||
| 24 | |||
| 25 | == JDBC Driver Version == | ||
| 26 | |||
| 27 | * It's recommended to use the latest version of the MySQL JDBC driver (8.x) if you're using MySQL 5.7+. | ||
| 28 | * If you're using XWiki < 13.3RC1, you should not use version 8.0.23 of the MySQL JDBC driver since it [[causes a problem with the Liquibase version used in XWiki>>https://jira.xwiki.org/browse/XWIKI-18515]]. | ||
| 29 | |||
| 30 | = Installation Steps = | ||
| 31 | |||
| 32 | Follow these instructions: | ||
| 33 | |||
| 34 | * Download and install [[MySQL>>http://www.mysql.com/]] 5.7 or greater. | ||
| 35 | * Start the MySQL server. You can do that in several ways. For example use {{code language="shell"}}mysqld --console{{/code}} | ||
| 36 | * Create the wiki database. You can use the name you want for the database, but you will have to set the hibernate configuration file and ##xwiki.cfg## file accordingly.((( | ||
| 37 | You can create the database in several ways. For example use: | ||
| 38 | |||
| 39 | {{code language="shell"}} | ||
| 40 | mysql -u root -e "create database xwiki default character set utf8mb4 collate utf8mb4_bin" | ||
| 41 | {{/code}} | ||
| 42 | ))) | ||
| 43 | * Create the ##xwiki## user with password ##xwiki##((( | ||
| 44 | {{code language="shell"}} | ||
| 45 | mysql -u root -e "CREATE USER 'xwiki'@'localhost' IDENTIFIED BY 'xwiki'"; | ||
| 46 | {{/code}} | ||
| 47 | ))) | ||
| 48 | * Give privileges to the ##xwiki## user for accessing and creating databases (for the multi wiki support). Specifically the ##xwiki## users needs permissions to be able to execute {{code language="sql"}}CREATE DATABASE{{/code}}, {{code language="sql"}}DROP SCHEMA{{/code}}, and then all CRUD operations on tables. Note that the command below should be tuned to be more restrictive as granting all permissions is not required:((( | ||
| 49 | {{code language="shell"}} | ||
| 50 | mysql -u root -e "grant all privileges on *.* to xwiki@localhost" | ||
| 51 | {{/code}} | ||
| 52 | ))) | ||
| 53 | * If the above command fails with a password-does-not-meet-requirements error, uninstall the MySQL password_validate plugin or pick a more complex password and update the password used by default in ##hibernate.cfg.xml##:((( | ||
| 54 | {{code language="shell"}} | ||
| 55 | mysql -u root -p -e "uninstall plugin validate_password;" | ||
| 56 | {{/code}} | ||
| 57 | ))) | ||
| 58 | * Please make sure that the DNS-name "localhost" is defined in your hosts-file (i.e. ##/etc/hosts##) | ||
| 59 | * You need to have the MySQL JDBC Driver JAR (named ##mysql-connector-java*.jar##) installed in XWiki's WAR file. If this file isn't present in XWiki's ##WEB-INF/lib## directory you'll need to download it and copy it there. You can download it from the [[MySQL Connector/J Driver page>>http://www.mysql.com/downloads/connector/j/]] or directly from the [[Maven Central Repository>>https://repo1.maven.org/maven2/mysql/mysql-connector-java/]].((( | ||
| 60 | {{warning}} | ||
| 61 | You need the 5.x version or higher. The 3.x version doesn't handle Boolean data correctly and will either throw errors or will make all documents hidden by default. | ||
| 62 | {{/warning}} | ||
| 63 | ))) | ||
| 64 | * Now you need to tell XWiki to use MySQL. To do this, edit the ##WEB-INF/hibernate.cfg.xml## file where you have expanded the XWiki WAR file and replace the matching properties with the following ones:((( | ||
| 65 | {{code language="xml"}} | ||
| 66 | <property name="connection.url">jdbc:mysql://localhost/xwiki</property> | ||
| 67 | <property name="connection.username">xwiki</property> | ||
| 68 | <property name="connection.password">xwiki</property> | ||
| 69 | <property name="connection.driver_class">com.mysql.jdbc.Driver</property> | ||
| 70 | <property name="connection.useUnicode">true</property> | ||
| 71 | <property name="connection.characterEncoding">UTF-8</property> | ||
| 72 | {{/code}} | ||
| 73 | |||
| 74 | {{info}} | ||
| 75 | * By default MySQL only accepts packets that are smaller than 1MB. If you get the "Packet for query is too large (max_allowed_packet)" error then see the [[Packet too large error page>>http://dev.mysql.com/doc/refman/5.0/en/packet-too-large.html]]. For example to increase the packet size to 32M you could start the MySQL server with {{code language='shell'}}mysqld --console --max_allowed_packet=32M{{/code}} or you can modify directly the ##my.cnf## configuration file to set this value permanently. | ||
| 76 | * If an empty XWiki starts with no errors, but you are unable to upload the default set of pages (XAR file) try to increase the ##max_allowed_packet## parameter as shown above. | ||
| 77 | {{/info}} | ||
| 78 | ))) | ||
| 79 | |||
| 80 | = Indexes = | ||
| 81 | |||
| 82 | See [[Database Administration>>Documentation.AdminGuide.Performances.Database Administration.WebHome]]. | ||
| 83 | |||
| 84 | {{code language="mysql"}} | ||
| 85 | // Required | ||
| 86 | create index xwl_value on xwikilargestrings (xwl_value(50)); | ||
| 87 | create index xwd_parent on xwikidoc (xwd_parent(50)); | ||
| 88 | create index xwd_class_xml on xwikidoc (xwd_class_xml(20)); | ||
| 89 | create index xda_docid1 on xwikiattrecyclebin (xda_docid); | ||
| 90 | create index solr_iterate_all_documents on xwikidoc (XWD_WEB(500), XWD_NAME(253), XWD_LANGUAGE(5), XWD_VERSION(10)); | ||
| 91 | // Only required if you use stats (feature is off by default) | ||
| 92 | create index xws_number on xwikistatsdoc (XWS_NUMBER); | ||
| 93 | create index xws_classname on xwikistatsdoc (XWS_CLASSNAME); | ||
| 94 | create index xwr_number on xwikistatsreferer (XWR_NUMBER); | ||
| 95 | create index xwr_classname on xwikistatsreferer (XWR_CLASSNAME); | ||
| 96 | create index xwr_referer on xwikistatsreferer (XWR_REFERER(50)); | ||
| 97 | create index xwv_user_agent on xwikistatsvisit (XWV_USER_AGENT(255)); | ||
| 98 | create index xwv_cookie on xwikistatsvisit (XWV_COOKIE(255)); | ||
| 99 | create index xwv_classname on xwikistatsvisit (XWV_CLASSNAME); | ||
| 100 | create index xwv_number on xwikistatsvisit (XWV_NUMBER); | ||
| 101 | {{/code}} | ||
| 102 | |||
| 103 | {{info}} | ||
| 104 | Note to XWiki developers: The following indexes could be created automatically though since they're less than 255 characters and thus should be added in a future version of XWiki so that they don't need to be created manually: | ||
| 105 | |||
| 106 | {{code language="mysql"}} | ||
| 107 | create index xws_number on xwikistatsdoc (XWS_NUMBER); | ||
| 108 | create index xws_classname on xwikistatsdoc (XWS_CLASSNAME); | ||
| 109 | create index xwr_number on xwikistatsreferer (XWR_NUMBER); | ||
| 110 | create index xwr_classname on xwikistatsreferer (XWR_CLASSNAME); | ||
| 111 | create index xwv_classname on xwikistatsvisit (XWV_CLASSNAME); | ||
| 112 | create index xwv_number on xwikistatsvisit (XWV_NUMBER); | ||
| 113 | create index xda_docid1 on xwikiattrecyclebin (xda_docid); | ||
| 114 | {{/code}} | ||
| 115 | {{/info}} | ||
| 116 | |||
| 117 | = Tips = | ||
| 118 | |||
| 119 | == MySQL 8 == | ||
| 120 | |||
| 121 | * If you're using MySQL 8+ you'll need to configure MySQL with native password: ##default-authentication-plugin=mysql_native_password##. | ||
| 122 | * You'll also be able to switch from ##com.mysql.jdbc.Driver## to ##com.mysql.cj.jdbc.Driver## JDBC driver (since the previous driver class is now deprecated). | ||
| 123 | * If you get the following error then you'll need to force the timezone to use either by setting it in:((( | ||
| 124 | * The MySQL conf file on the server | ||
| 125 | * In the XWiki ##hibernate.cfg.xml## file in the ##hibernate.connection.serverTimezone## property (e.g. ##<property name="hibernate.connection.serverTimezone">Europe/Berlin</property>##). | ||
| 126 | * In the XWiki ##hibernate.cfg.xml## file inside the JDBC URL string as in ##jdbc:mysql:~/~/localhost:3306/myschema?serverTimezone=UTC## | ||
| 127 | |||
| 128 | {{code language="none"}} | ||
| 129 | The server timezone value 'CDT' is unrecognized or represents more than one timezone. You must configure either the server or JDBC driver (via the serverTimezone configuration property) to use a more specifc timezone value if you want to utilize timezone support. | ||
| 130 | {{/code}} | ||
| 131 | |||
| 132 | For more details see [[this explanation post>>https://stackoverflow.com/a/54256150/153102]]. | ||
| 133 | ))) | ||
| 134 | |||
| 135 | == Convert a database to utf8mb4/utf8mb4_bin == | ||
| 136 | |||
| 137 | {{code language="shell"}} | ||
| 138 | #!/bin/bash | ||
| 139 | |||
| 140 | db=xwiki | ||
| 141 | to_character_set=utf8mb4 | ||
| 142 | to_collation=utf8mb4_bin | ||
| 143 | |||
| 144 | mysql_cmd="mysql -u root" | ||
| 145 | |||
| 146 | $mysql_cmd -e "ALTER DATABASE $db CHARACTER SET $to_character_set COLLATE $to_collation;" | ||
| 147 | |||
| 148 | TBL_LIST=$($mysql_cmd -N -s -r -e "use $db;show tables;") | ||
| 149 | |||
| 150 | echo "Temporarily disable all the foreign keys" | ||
| 151 | |||
| 152 | $MYSQL_COMMAND -e "SET FOREIGN_KEY_CHECKS=0;" | ||
| 153 | for tbl_name in $TBL_LIST; | ||
| 154 | do | ||
| 155 | $mysql_cmd -e "alter table $db.$tbl_name convert to character set $to_character_set collate $to_collation;" | ||
| 156 | done | ||
| 157 | |||
| 158 | echo "Turn foreign keys back on" | ||
| 159 | |||
| 160 | $MYSQL_COMMAND -e "SET FOREIGN_KEY_CHECKS=1;" | ||
| 161 | |||
| 162 | echo "Here the result of the operation:" | ||
| 163 | $mysql_cmd -e "USE $db;SELECT TABLE_CATALOG, TABLE_SCHEMA, TABLE_NAME, COLUMN_NAME, COLLATION_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_SCHEMA=DATABASE();" | ||
| 164 | {{/code}} | ||
| 165 | |||
| 166 | {{info}} | ||
| 167 | In case the above script fails with "ERROR 1118 (42000) at line 1: Row size too large. The maximum row size for the used table type, not counting BLOBs, is 65535. This includes storage overhead, check the manual. You have to change some columns to TEXT or BLOBs | ||
| 168 | xwikistatsvisit", you can use the following SQL statements to change tables column types to LONGTEXT to be able to convert the tables to utf8mb4. | ||
| 169 | {{/info}} | ||
| 170 | |||
| 171 | {{code}} | ||
| 172 | ALTER TABLE activitystream_events MODIFY ase_url LONGTEXT, MODIFY ase_title LONGTEXT, MODIFY ase_body LONGTEXT, MODIFY ase_param1 LONGTEXT, MODIFY ase_param2 LONGTEXT, MODIFY ase_param3 LONGTEXT, MODIFY ase_param4 LONGTEXT, MODIFY ase_param5 LONGTEXT; | ||
| 173 | ALTER TABLE xwikistatsreferer MODIFY XWR_REFERER LONGTEXT; | ||
| 174 | ALTER TABLE xwikistatsvisit MODIFY XWV_USER_AGENT LONGTEXT, MODIFY XWV_COOKIE LONGTEXT; | ||
| 175 | ALTER TABLE xwikipreferences MODIFY XWP_LEFT_PANELS LONGTEXT, MODIFY XWP_RIGHT_PANELS LONGTEXT, MODIFY XWP_DOCUMENT_BUNDLES LONGTEXT; | ||
| 176 | {{/code}} | ||
| 177 | |||
| 178 | You can also look at [[this snippet to perform this conversion inside XWiki>>snippets:Extension.Migrate MySQL databases to utf8mb4]]. | ||
| 179 | |||
| 180 | == Convert from MyISAM to InnoDB == | ||
| 181 | |||
| 182 | {{code language="shell"}} | ||
| 183 | #!/bin/bash | ||
| 184 | |||
| 185 | MYSQL_COMMAND=mysql | ||
| 186 | TO_ENGINE=INNODB | ||
| 187 | |||
| 188 | DATABASES=$(mysql -N -s -r -e 'show databases'|grep -v ^information_schema$|grep -v ^mysql$) | ||
| 189 | |||
| 190 | for db in $DATABASES | ||
| 191 | do | ||
| 192 | |||
| 193 | echo "Working on database $db..." | ||
| 194 | echo "" | ||
| 195 | |||
| 196 | TABLES=$(mysql -N -s -r -e "show tables from $db;") | ||
| 197 | |||
| 198 | for tb in $TABLES | ||
| 199 | do | ||
| 200 | |||
| 201 | $MYSQL_COMMAND -e "ALTER TABLE $db.$tb ENGINE = $TO_ENGINE;" | ||
| 202 | |||
| 203 | done | ||
| 204 | |||
| 205 | $MYSQL_COMMAND -e "SELECT table_name,Engine,table_collation FROM information_schema.tables WHERE table_schema = DATABASE();" | ||
| 206 | |||
| 207 | echo "" | ||
| 208 | echo "" | ||
| 209 | |||
| 210 | done | ||
| 211 | {{/code}} | ||
| 212 | |||
| 213 | = Troubleshooting = | ||
| 214 | |||
| 215 | == "Incorrect string value" error with MySQL connector 8.0.29+ | ||
| 216 | |||
| 217 | There seems to be a regression in MySQL connector 8.0.29 that leads to using the default encoding even when it's explicitly indicated in the hibernate.cfg.xml file (which is what you have in the MySQL configuration recommendation provided by XWiki). We are currently searching what could be the cause and find a workaround in https://jira.xwiki.org/browse/XWIKI-19853 but in the (and in general) it's recommended to make sure that you are running XWiki with the right default Java encoding. You can do that by making sure Java is run with ##-Dfile.encoding=utf8## (this is generally the default in standard Tomcat packages of various Linux distribution, but it might not always be the case). | ||
| 218 | |||
| 219 | == Unable to login to MySQL Console == | ||
| 220 | |||
| 221 | When running {{code language="shell"}}mysql -u root -e "create database xwiki default character set utf8mb4{{/code}} you may get a {{code}}ERROR 1045 (28000): Access denied for user 'xwiki'@'localhost' (using password: YES){{/code}} error. | ||
| 222 | This means that you have a password set for the MySQL root user, but you are not specifying it in the console command. You must also use the //-p// parameter. Using this you will be prompted to enter the password and be allowed to login to the MySQL console and create the database. | ||
| 223 | |||
| 224 | == Can't create test file == | ||
| 225 | |||
| 226 | When running ##mysqld ~-~-console## you may get the following (especially if you're on a Mac): | ||
| 227 | |||
| 228 | {{code language="none"}} | ||
| 229 | 071111 17:20:53 [Warning] Can't create test file /usr/local/mysql-5.0.45-osx10.4-i686/data/Vincent.lower-test | ||
| 230 | 071111 17:20:53 [Warning] Can't create test file /usr/local/mysql-5.0.45-osx10.4-i686/data/Vincent.lower-test | ||
| 231 | mysqld: Can't change dir to '/usr/local/mysql-5.0.45-osx10.4-i686/data/' (Errcode: 13) | ||
| 232 | 071111 17:20:53 [ERROR] Aborting | ||
| 233 | {{/code}} | ||
| 234 | |||
| 235 | To start MySQL run the following command instead: | ||
| 236 | |||
| 237 | {{code}} | ||
| 238 | sudo /usr/local/mysql/bin/mysqld_safe --user=mysql | ||
| 239 | {{/code}} | ||
| 240 | |||
| 241 | == Data Truncation Error == | ||
| 242 | |||
| 243 | If you receive an Exception like the following while installing/upgrading XWiki, chances are that you are using an outdated version of MySQLConnectorJ. | ||
| 244 | |||
| 245 | {{code language="none"}} | ||
| 246 | Caused by: java.sql.BatchUpdateException: Data truncation: Out of | ||
| 247 | range value adjusted for column 'XWD_HIDDEN' at row 1 | ||
| 248 | at com.mysql.jdbc.PreparedStatement.executeBatch(PreparedStatement.java:894) | ||
| 249 | at org.apache.commons.dbcp.DelegatingStatement.executeBatch(DelegatingStatement.java:294) | ||
| 250 | at org.apache.commons.dbcp.DelegatingStatement.executeBatch(DelegatingStatement.java:294) | ||
| 251 | at org.hibernate.jdbc.BatchingBatcher.doExecuteBatch(BatchingBatcher.java:48) | ||
| 252 | at org.hibernate.jdbc.AbstractBatcher.executeBatch(AbstractBatcher.java:246) | ||
| 253 | {{/code}} | ||
| 254 | |||
| 255 | On Linux, mysql-connector-java-3.x has proven **not** to work due to a bug in the handling of UTF-8 and lack of support for Boolean types. | ||
| 256 | |||
| 257 | Upgrading to the latest version of MySQLConnectorJ should solve such an error in most of the cases. | ||
| 258 | |||
| 259 | == HTTP 500 Error == | ||
| 260 | |||
| 261 | {{code language="none"}} | ||
| 262 | HTTP Status 500 - | ||
| 263 | |||
| 264 | type Exception report | ||
| 265 | |||
| 266 | message | ||
| 267 | |||
| 268 | descriptionThe server encountered an internal error () that prevented it from fulfilling this request. | ||
| 269 | |||
| 270 | exception | ||
| 271 | |||
| 272 | javax.servlet.ServletException: com.xpn.xwiki.XWikiException: Error number 3 in 0: Could not initialize main XWiki context | ||
| 273 | Wrapped Exception: Error number 3001 in 3: Cannot load class com.xpn.xwiki.store.migration.hibernate.XWikiHibernateMigrationManager from param xwiki.store.migration.manager.class | ||
| 274 | Wrapped Exception: Error number 0 in 3: Exception while hibernate execute | ||
| 275 | Wrapped Exception: Could not create a DBCP pool. There is an error in the hibernate configuration file, please review it. | ||
| 276 | |||
| 277 | root cause | ||
| 278 | |||
| 279 | com.xpn.xwiki.XWikiException: Error number 3 in 0: Could not initialize main XWiki context | ||
| 280 | Wrapped Exception: Error number 3001 in 3: Cannot load class com.xpn.xwiki.store.migration.hibernate.XWikiHibernateMigrationManager from param xwiki.store.migration.manager.class | ||
| 281 | Wrapped Exception: Error number 0 in 3: Exception while hibernate execute | ||
| 282 | Wrapped Exception: Could not create a DBCP pool. There is an error in the hibernate configuration file, please review it. | ||
| 283 | {{/code}} | ||
| 284 | |||
| 285 | In this case, try to disable **skip-networking** in MySQL *.ini file. Thanks a lot //M Rawash// (see his comment below). | ||
| 286 | |||
| 287 | == Unknown database 'xwiki' == | ||
| 288 | |||
| 289 | If you get the following error: | ||
| 290 | |||
| 291 | {{code language="none"}} | ||
| 292 | Caused by: class com.mysql.jdbc.exceptions.jdbc4.MySQLSyntaxErrorException: Unknown database 'xwiki' | ||
| 293 | at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) | ||
| 294 | at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57) | ||
| 295 | at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45) | ||
| 296 | at java.lang.reflect.Constructor.newInstance(Constructor.java:526) | ||
| 297 | at com.mysql.jdbc.Util.handleNewInstance(Util.java:408) | ||
| 298 | at com.mysql.jdbc.Util.getInstance(Util.java:383) | ||
| 299 | at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:1062) | ||
| 300 | at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:4226) | ||
| 301 | at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:4158) | ||
| 302 | at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:2615) | ||
| 303 | at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:2776) | ||
| 304 | at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2834) | ||
| 305 | at com.mysql.jdbc.ConnectionImpl.setCatalog(ConnectionImpl.java:5456) | ||
| 306 | at org.apache.commons.dbcp.DelegatingConnection.setCatalog(DelegatingConnection.java:374) | ||
| 307 | at org.apache.commons.dbcp.DelegatingConnection.setCatalog(DelegatingConnection.java:374) | ||
| 308 | at org.apache.commons.dbcp.PoolingDataSource$PoolGuardConnectionWrapper.setCatalog(PoolingDataSource.java:333) | ||
| 309 | at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) | ||
| 310 | at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) | ||
| 311 | at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) | ||
| 312 | at java.lang.reflect.Method.invoke(Method.java:606) | ||
| 313 | at org.hibernate.jdbc.BorrowedConnectionProxy.invoke(BorrowedConnectionProxy.java:74) | ||
| 314 | at com.sun.proxy.$Proxy47.setCatalog(Unknown Source) | ||
| 315 | at com.xpn.xwiki.store.XWikiHibernateBaseStore.setDatabase(XWikiHibernateBaseStore.java:729) | ||
| 316 | at com.xpn.xwiki.store.XWikiHibernateBaseStore.beginTransaction(XWikiHibernateBaseStore.java:911) | ||
| 317 | at com.xpn.xwiki.store.XWikiHibernateBaseStore.beginTransaction(XWikiHibernateBaseStore.java:843) | ||
| 318 | at com.xpn.xwiki.store.XWikiHibernateStore.loadXWikiDoc(XWikiHibernateStore.java:830) | ||
| 319 | ... | ||
| 320 | {{/code}} | ||
| 321 | |||
| 322 | It means that XWiki could connect to your database but there's no ##xwiki## schema available there. This is the default name of the schema XWiki is looking for, for the main wiki database. | ||
| 323 | |||
| 324 | It probably means you've created a database named other than ##xwiki## (for example you might have created a database named ##abcd## and set the following connection URL in your ##hibernate.cfg## file: {{code language="none"}}<property name="connection.url">jdbc:mysql://localhost/abcd</property>{{/code}}). | ||
| 325 | |||
| 326 | If this is the case [[you need to tell XWiki that you're using a different schema by setting the ##xwiki.db## configuration property>>platform:AdminGuide.Configuration#HConfigurethenamesofdatabaseschemas]]. | ||
| 327 | |||
| 328 | == MySQLSyntaxErrorException: Row size too large (> 8126) == | ||
| 329 | |||
| 330 | if you get the following error: | ||
| 331 | |||
| 332 | {{code language="none"}} | ||
| 333 | MySQLSyntaxErrorException: Row size too large (> 8126). | ||
| 334 | Changing some columns to TEXT or BLOB or using ROW_FORMAT=DYNAMIC or ROW_FORMAT=COMPRESSED may help. | ||
| 335 | In current row format, BLOB prefix of 768 bytes is stored inline. | ||
| 336 | {{/code}} | ||
| 337 | |||
| 338 | When you are using a MySQL Server 5.6.20 you can get a "row size too large error." | ||
| 339 | In the release notes, it is explained that a innodb_log_file_size which is too small will trigger a "Row size too large error." | ||
| 340 | |||
| 341 | You can solve the problem by changing the innodb_log_file_size in the my.ini text file. | ||
| 342 | Find more details in the link below. | ||
| 343 | http://dev.mysql.com/doc/relnotes/mysql/5.6/en/news-5-6-20.html |
